Short-Term Repair Tips for Broken or Damaged Gold Chains

One moment the necklace might be around your neck, and the next moment it's broken. It can be scary when your gold diamond chains are in pieces; however, you don't have to moan that this is the end of your jewelry. There are different ways to attach a broken pendants chain, and the technique used depends on the type of chain and the nature of the breakage. You can avoid an expensive trip to your jewelry store and attach your gold diamond chains. If it's a broken ring, you may just need to replace it. However, if this fails, you can try re-soldering the Real Gold chains.

Why jewelry chains break

Specific detective skills may be required to detect chain breakage. By carefully examining the piece with a magnifying glass, hints can be discovered. Ask your jewelry customer questions about both recent and wearing habits. This section gives you a checklist to troubleshoot problems as they occur and gives you a quality check to establish best practices in your studio. Begin repair requests for stretched chains, broken links, broken clamps, and jumper rings to inform you of your choices.

Common Ways to Fix Your Gold Chain

1. How to replace the clasp

Fastening is an essential part of any piece of jewelry as it holds both sides of the necklace together. Accidentally breaking the clasp is very easy and common, but you can't wear jewelry without this vital piece.

It is always a good idea to bring your jewelry to the jeweler when it is broken. Professionals usually have better tools and materials to get the piece back to its original condition. If not, then you can replace the buckle and the jump ring yourself. You also need some types of jewelry pliers, such as the flat nose and needle pliers.

Use two pliers to pull off the jumper attached to one side of your Real Gold chains. Then open the ring on the base of the clip on the other side. Remove both of these pieces and use pliers to open your new jumper ring and clip. Slide them onto the link on your gold chain and close the pliers to back up the ring. Be sure to close it tightly to prevent the new clip from breaking.

Although you can do it yourself, this type of repair does not always take a long time, especially if you have a large and heavy chain, so we recommend bringing it to a jeweler if possible.

2. Attach the jump ring to the pendant

The jump ring is an essential element in jewelry making, as it helps to save jewelry in different parts. Sometimes the jumper attached to your pendant can come off, causing the pendant to fall off your chain. It's a reasonably simple solution, but you want to be sure to notice when this happens; Otherwise, you risk losing your favorite pendants chain.

As with the broken clip solution, you will also need two pairs of jewelry pliers and a new jumper ring. If the old jumper is still attached to the pendant but not to the chain, remove it. When the snap ring is completely gone, all you have to do is use pliers to open a new snap ring, slide it through the place where the pendant is attached to the chain, and then push the snap ring closed to the pliers again.

Once this piece is broken, it can happen again. If you wear a weighty pendant, it is more prone to breakage, so you may want to invest in a thicker or heavier jump ring.

3. Polish Gold Plated 

If you buy gold-plated pieces that are not made of a solid gold alloy, you need to grind them. Over time, you will notice that minimal fading begins to develop. Although it may not be very obvious at first, the longer you let it sit, the more dirt and grime are created and the dirty it is.

So, plan to polish your jewelry often. Even some solid pieces of gold stain a little if they are not made of higher purity. To maintain the shape, gold must be mixed with metal alloys.

You can prevent the accumulation of dirt by wiping the jewelry after each use. However, if you have already noticed the color changes, you can polish your jewelry using a jewelry cloth. 

Tips to keep your Jewelry Safe

The chains are not elastic. It is essential to explain this to customers. An excessive pulling or stretching of the gold diamond chains will cause them to break or the links to elongate and deform. A few tips that will help you keep your jewelry safe:

• Do not pull the chain over to put it on or off.
• Remove the necklaces while holding or playing with the child.
• Do not wear jewelry chains when you participate in sports or other activities where the chain may get stuck.
• Do not wear jewelry on the bed.

Conclusion

These are some methods you can use to repair or repair your broken Real Gold chains. You need to understand the type of chain you own and the best method you can use to repair the piece. Not all chains require soldering, but others do.